DESCRIPTION
Fiberglass mesh (E-glass type), is a product characterized primarily by resistance to alkaline environment. It is coated with a layer of SBR (Styrene-Butadiene). Using a LENO-type fabric, the fiberglass mesh weighing 160 g/m2 confers resistance to the wall rendering and a lifetime equal to that of the plasters it reinforces.
- Fiberglass mesh with a weight of 160 g/m2 is used as a reinforcing element for external thermal insulation system (ETICS) based on mineral wool, expanded polystyrene or other types ofthermal insulation board;
- Reinforcement of interior and exterior plasters, protecting them from cracking;
- Manufacture of reinforcement layers for facade renovations.
CERTIFICATIONS
Manufacturer BICO INDUSTRIES S.A. has implemented an integrated management system: quality, environment, occupational health and safety, according to ISO 9001, ISO 14001 and ISO 45001 - AEROQ certificates.
CLASSIFICATION ACCORDING TO CHEMICAL STANDARDS. POSSIBLE RISKS, PREVENTION REQUIREMENTS
Fiberglass mesh does not require marking and is not a dangerous product. According to Regulation (EC) no. 1907/2006 of the European Parliament and of the Council, fiberglass reinforcement does not require the safety data sheet.
SPECIFIC CONDITIONS, STORAGE, TRANSPORTATION
- Specific condition: it is recommended to be stored in clean, dry places, at temperatures between -5°C and 30°C, protected from the direct radiation of any heat source or from the direct action of the sun's rays;
- Storage: to be stored in rolls positioned vertically, in covered and appropriate storages;
- Transportation: the rolls of fiberglass mesh, positioned vertically on pallets, are being transported with adequate and covered transportation.
