BICO® mesh Fiberglass mesh (E-glass type)

The fiberglass mesh from Tainuo Fiberglass Mesh Factory range guarantees a durable reinforcement of surfaces with a thick, medium or thin layer of plaster. Our fiberglass mesh is made of “E-glass” yarns and it is primed with an emulsion of Styrene-butadiene specially created for the glass yarn. This compatibility of raw materials offers a high resistance in the alkaline environment of the reinforcement mortar and a lifespan equal to the plasters it reinforces.

The BICO fiberglass mesh is mainly used as reinforcement element in the External Thermal Insulation Composite System (ETICS) based on mineral wool, expanded polystyrene or any other type of thermal insulation board.

BICO fiberglass mesh complies with the highest national and European quality standards. Our products have an ETA approval (European Technical Assessment – ETA 18/0372 of 07/10/2018) and the quality control compliance in our production environment is periodically certified according to ETA standards ETA (Certificate of Conformity of the Factory Production Control no. 1020-CPR-060048297).

Exterior plasters are exposed to extreme fluctuations in climatic conditions, and Tainuo Fiberglass Mesh Factory fiberglass mesh, with a minimum elongation, even in conditions of exposure to extreme temperature variations, it is the element that reinforces and offers durability to the whole thermal system.

In the case of interior plasters, the Tainuo Fiberglass Mesh Factory fiberglass mesh reinforces and offers flexibility to the support layer it is integrated into, preventing cracks.

FIELD OF USE

• ETICS SYSTEMS

  Reinforcement element in the external thermal insulation composite system (ETICS) based on mineral wool, expanded polystyrene or any other type of thermal insulation board;

• PLASTERS REINFORCEMENT

  external and internal plaster reinforcement on vertical or horizontal surfaces;

• FACADE RENEWAL

  manufacture of reinforcement layers for facade renovation;

• GYPSUM FINISHES

  Reinforcement of plasters with gypsum-based finishes in case of interactions between materials with different expansion coefficients;

• PANEL REINFORCEMENT

  reinforcement of panels made of different materials (e.g. concrete, gypsum, mortar, EPS);

• MOSAIC, MARBLE AND NATURAL STONE

  stabilizing element in the assembling of mosaic tiles, marble, or natural stone.